Public Jobs

The project consists of abrasive blasting and recoating the bowl interior, abrasive blasting and recoating specified areas inside the column, preparing and recoating dry column valves, fittings, and appurtenances, pressure washing the exterior, recoating the logos, and removing cathodic protection from the 1,000,000 gallon steel fluted column water storage tank.

Relocate existing fuel farm; construct concrete refueling apron.

The Work includes the following principal items: 8-Unit T-Hangar

The Work includes the following principal items: Crack Repair, Seal Coat, Remarking

The Work includes the following principal items: Crack Repair, Seal Coat, Remarking

The Project consists of approximately 1,000 linear feet of gravity sewer, of which approximately 960 linear feet is 18-inch and 40 linear feet is 12-inch; 8 manholes; the abandonment of the existing sewer; and all related appurtenances.

The project consists of a new, realigned entry road, removal of existing and construction of a new surface parking area, a large meadow area will replace the existing parking area, there are two large bioswales located in the center of the new parking area, and the entry road will terminate at a new drop-off zone near the main existing boat ramp. The project also includes wood deck river overlooks, site furnishings, two new electronic pay stations, fencing, timber guardrail, landscaping, stormwater and sanitary utility work, as well as construction of a new potable water line.

The project site work improvements consist of but not limited to site demolition, clearing and grubbing, erosion and sediment control, earthwork, storm drainage, resurfacing existing asphalt parking lot, striping parking lot, concrete curbs, concrete sidewalks, asphalt walking path, concrete pavers, underground site electrical service to 5’ of the building, site lighting, and landscaping.

The Project consists of improvements to convert the existing wet well / dry pit pump station into a submersible pump station with six (6) new variable speed submersible wastewater pumps and appurtenances. Four of the pumps will be high-flow pumps, and two will be low-flow pumps to match off-peak duty flow conditions. Isolation valves will be installed on the two pump station effluent force mains. Two magnetic flow meters will be installed in a concrete vault on the force mains. The existing Electrical Building will be demolished, and two prefabricated electrical buildings (eHouses) will be provided to house the variable frequency drives (VFDs), electrical distribution, motor control equipment, and SCADA controls with temperature and humidity control. The Owner is proceeding with early procurement of the new pumps, VFDs, plug valves and actuators, flow meters, and eHouses, to be included in the Contract as Allowance items.